Sahana Engineering

Adjustable Level Switch for use in Sumps, Over Head Tanks, Storage tanks. It is easy to install & the levels are adjustable at site. 

Construction:

• Adjustable Level Switch consists of separate Level Switch assembly for each level like Low, High, Middle or Multi-level. These individual level switch assay, are suspended through SS Rope & are freely adjustable along the SS rope. The level switch assay, are provided with adjustable disc which can slide through the SS rope & are secured to SS rope with stopper or cable tie at required levels. The cables are terminated inside a weatherproof enclosure. The adjustable Level Switch is provided with mounting flange of standard size. 

Features:

• Corrosion resistance
• Precise design
• Optimum Performance
• Low maintenance

Measuring Principle

• An infrared emitter sends chopped light into the Prism. When in air the light undergoes total internal reflection and is sensed by the Photo-detector.

• When the Prism is covered by the liquid, the light gets dispersed and so is not detected. This change is processed to signal an alarm.

Applications:

• Liquids like Beer, Glucose, Alcohol, Petrol, Diesel, Oil, Fruit Juice, Water, Chemicals, Honey, Serated Drinks, Etc.

 

Type Of Industries:

• Breweries, Water & Waste Water Management, Petrochemicals, Food Processing, Pharamaceuticals, Cosmetics, Edible Oil, Chemical, Machine Building.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

We are offering Miniature Level Switch. Offered switch is a compact construction, suitable for mounting vertically. These are used in various industries as equipment. Tested on various quality parameters, our switches are available at nominal rates to the clients.

Miniature Float Switch is suitable for single level sensing. It consists of a Reed Switch housed inside the SS housing & a permanent magnet inside the Float assembly. The Float moving with the liquid level makes (NC) & breaks (NO) the Reed Switch contact. It is used for sensing Low, High or point level in tanks. The mounting is through a M10 male thread

Features:

• Ergonomic design
• Optimum performance
• Enhanced durability
• Lightweight

 

Details:

• PiCos ‘LiquiTune’ is a compact point level switch suitable for liquids and slurries of density greater than 0.7gms/cc and up to a viscosity of 10,000 Centipoise. Due to its compact construction it can be used in small vessels and pipelines where available space is at a premium.
• It is unaffected by Foam, Turbulence, Air bubbles and Electrical characteristics of the service material. Wetted parts are of highly polished non-corrosive stainless steel, so suitable for food grade and pharmaceutical applications.

Measuring Principle

• The fork is driven by Piezo elements at its resonant frequency. The resonant frequency of the fork is inversely proportional to the mass of liquid moved per second. Therefore the resonant frequency reduces as more and more tines get covered with the liquid. This change in the resonant frequency is accurately measured by ‘LiquiTune' electronics and used to signal an alarm. Open collector PNP output is available as standard for connection to PLC or for relay operation.

Applications

• Liquids like : Diesel , Oil, Edible Oil , Gear Oil , Honey, Water, Juices, Aerated Drinks, Milk, Chemical Detection of Liquids in Pipelines, Silos and tanks